How to deal with the failure of pasteurization equipment?
Auther：507
Pubdate：2019-09-22 09:35:47
Fault treatment of automatic pasteurization machine:
1. No water and power supply is allowed. Before power supply is turned on, check whether there is water first, and then confirm that the water level exceeds 2/3 of the bucket level.
2. starting to determine whether the centrifugal pump is forward, reverse case to inform the electrician to change the anode and cathode.
3. When closing the sterilizer, please do not put your hand on the edge of the jar. Hold the lid handle in your hand and cover it carefully.
4. before each sterilization to press the reset switch.
5. After sterilization, if there is no milk in the tank, wash the tank with hot water in time and clean the pipeline through circulation.
6. do not use for a long time, or the temperature is higher, can be used up after the alkali 2% cleaning, and then use hot water circulation rinse.
7. Consult zhucheng taihao pasteurization machine technicians if there is any doubt.
